According to the pulling force, hydraulic pultrusion machines are divided into 12MT, 16MT and 
20MT specifications.  The pull force directly decides on an FRP profile's size.  

The working process of the machine consists of heating up and molding the FRP raw materials
 in the die, then pulling out the molded material continuously to obtain the required FRP profiles
 under the alternative operation of 2 clamped tractive pullers.
      
The machine is made up of the following parts: clamped tractive puller, electric heater, electric 
control tank, pump station, pushing oil cylinder, clamping oil cylinder and cutter. The machines' 
benefits include simple and continuous operation, low operating cost, high reliability, and efficient
 production. 

Our caterpillar pultrusion machines are seldom used because of the small pull force; they are 
mainly for small-size FRP profiles.
  
NAME
TYPE
Exterior Size(m)
Section of Clamping
(mm)
Temperature Range
 
Heating
Power
(KW)
Motor
Power
(KW)
Working
Force
(MPa)
Total Weight
(Ton)
L×W×H
 
 
Hydraulic Pultrusion Machine
 
TTH-12
9.51×0.84×0.98
550×300
0-300
7.2
4.0KW×2
0-14
3.5
TTH-16
11.405×1.1×0.98
700×350
0-300
9.6
5.5KW×2
0-16
5.5
TTH-20
11.405×1.2×0.98
900×400
0-300
12
7.5KW×2
0-20
6.0
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Notes: 1 our equipment require the electric power of 3 phase-380V,50HZ, if there are difference in 
your area, please inform us the availability of the electric power before the order. The power can be 
custom-made.
      2the mandril fixed in the roll mat slitter is for the 3paper-core, if you have any special requirement,
 please inform us before the order/p&am;am;am;am;gt